Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 1141 / 2268

15 Enter a value for Edge X Offset to specify the horizontal distance of the muntins from the edges of the
pane.
16 Enter a value for Edge Y Offset to specify the vertical distance of the muntins from the edges of the pane.
Specifying prairie-12 lights pattern muntin edge X and Y offsets
17 Click OK.
18 Add additional muntins:
Then… If you want to add muntins to…
repeat this procedure from step 8. another window sash in the window style
click OK, and repeat this procedure from step 5. another display representation
select Automatically Apply to Other Display Representations
and Object Overrides. all display representations of the selected window style
19 Click OK three times.
After you add a muntins block to a window style, you can assign a material, such as wood, and specify display properties,
such as color and linetype, for the muntins. For more information, see “
About Window Display Components and
Materials ” on page 1084, “ Specifying the Display Properties of a Window Style ” on page 1086, and “ Creating and Editing
Material Definitions ” on page 522 respectively.
Adding Starburst Muntins to a Window Style
Use this procedure to add starburst muntins to a window style.
You add the muntins by editing the display properties of the window style for a display representation, such as Model
or Elevation, where you want the muntins to appear. You can add muntins to display representations individually.
You can also add muntins to a single display representation and automatically apply the muntins to all display
representations of that window style. You add the muntins block to the window style in the display properties. Each
muntins block becomes a display component of the window style.
You can add the starburst pattern only to the top window sash. You can apply the starburst pattern to window shapes
with a round, half round, or quarter round top.
You can apply the starburst pattern to the following window types: awning, single hopper, single transom, vertical
pivot, horizontal pivot, double hung, glider, single hung, single casement, and picture.
Specifying starburst pattern muntins
1 Open a tool palette that has a window tool.
2 Right-click a window tool, and click Window Styles.
3 Select the style you want to edit.
4 Click the Display Properties tab.
5 Select the display representation where you want the changes to appear, and select Style Override.
Creating Muntins in a Window Style | 1101