Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 2194 / 2268

<ComboBox idStr="head">
<Label>Head type</Label>
<Description>Head type to use for bolt</Description>
<ComboBoxValue idStr="blkHeadHex">
<Label>Hex</Label>
</ComboBoxValue>
<ComboBoxValue idStr="blkHeadSq">
<Label>Square</Label>
</ComboBoxValue>
<ComboBoxValue idStr="blkHeadRnd">
<Label>Round</Label>
</ComboBoxValue>
<Default>blkHeadHex</Default>
</ComboBox>
A ComboBox has a list of <ComboBoxValue> nodes that simply specify an idStr used to uniquely identify that item in
the list. Each <ComboBoxValue> must also have a <Label> element to display within the list.
If the <ComboBox> has a <Default> element, the listed idStr will be used as the default <ComboBoxValue>. If no
<Default> element is present, the first <ComboBoxValue> will be used as the default.
<Default> [Optional]
The <ComboBoxValue> idStr to use as the default selection in the list.
<CheckBox>
This type of control is used for Boolean values.
<CheckBox idStr="doStagger">
<Label>Stagger columns</Label>
<Default>0</Default>
</CheckBox>
It can have the following elements:
Description Element
The default Boolean value. It can be specified as any of the following
values: “1”, “0”, “true”, or “false.”. <Default> [Optional]
<EditBoxAngle>
This type of control corresponds to the AecEditBoxAngle class in AutoCAD Architecture and has the same basic options.
<EditBoxAngle idStr="slope">
<Label>Slope angle</Label>
<Default>0.0</Default>
<Validation>range</Validation>
<RangeLow>-45.0</RangeLow>
<RangeHigh>45.0</RangeHigh>
</EditBoxAngle>
It can have the following elements:
Description Element
The default angle value. This value is specified in degrees: <Default> [Optional]
Specifies what type of validation rule is used. Possible values are:
“Any”, “NoZero”, or “Range”. If not specified, “Any” is used by
default. <Validation> [Optional]
The lower end of the range of allowable values. <RangeLow> [Optional, except when validation="Range"]
The high end of the range of allowable values. <RangeHigh> [Optional, except when validation="Range"]
<EditBoxDistance>
This type of control corresponds to the AecEditBoxDist class in AutoCAD Architecture and has the same basic options.
<EditBoxDistance idStr="rowSpacing" unitDep="true">
<Label>Y-Axis</Label>
<Description>Spacing between bolts in Y direction</Description>
<Default>2.0</Default>
<Validation>NoNeg</Validation>
</EditBoxDistance>
2154 | Chapter 52 Customizing and Adding New Content for Detail Components