manualshive.com logo in svg

Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Introducing Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, a powerful software upgrade for AutoCAD 2005 users. Enhance your design capabilities with this comprehensive tool. Get started swiftly with the included Getting Started Manual. Download this user manual for free from manualshive.com to maximize your productivity and unleash your creativity.

Share
Download
background image

Specifying an Offset for a Curtain Wall Grid

By default, grids cells are measured from the start and end points of the curtain wall baseline (for horizontal divisions)
or from the floor line to the roof line (for vertical divisions). The width of the grid frame is not considered in calculating
the size of the cell. For example, if you draw a curtain wall with a 14' baseline and a 1' frame on the left and right, and
you specify a fixed number of vertical cells, the cells do not appear equal in size. The first and last cells appear smaller
because they include the frame. To make the cells equal in size, offset the start and end of the grid by the width of the
frame.

Specifying grid offset directions

NOTE You can offset the grid only when the division type is Fixed Cell Dimension, Fixed Number of Cells, or Manual.

1

On the Format menu, click Style Manager.

2

Expand Architectural Objects, and expand Curtain Wall Styles.

3

Select a curtain wall style.

4

Click the Design Rules tab.

5

In the left pane, select Divisions under Element Definitions.

6

Select a Division definition or create a new one.

7

Select Fixed Cell Dimension, Fixed Number of Cells, or Manual for Division Type.

8

Specify an offset for the grid.

Then …

If you want to specify the distance between …

enter a value for Start Offset.

the start point of the curtain wall baseline and the start of
the first cell in a horizontal grid

enter a value for End Offset.

the end point of the curtain wall baseline and the end of the
last cell in a horizontal grid

enter a value for Bottom Offset.

the floor line of the curtain wall and the start of the bottom
cell in a vertical grid

enter a value for Top Offset.

the roof line of the curtain wall and the end of the top cell in
a vertical grid

9

Click OK.

Removing a Division Definition from a Curtain Wall Style

Use this procedure to remove a division definition that you no longer need. You cannot remove a division definition
when it is currently assigned to a grid. In addition, you cannot remove the default division definition, but you can
modify it.

772 | Chapter 19   Curtain Walls

Summary of Contents for 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD

Barco TouchKit Installation & User Manual preview
TouchKit
Brand: Barco Pages: 31
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER
Brand: KAPERSKY Pages: 295
Nokia PC Suite 6.7 User Manual preview
PC Suite 6.7
Brand: Nokia Pages: 29
Nokia NetMonitor Manual preview
NetMonitor
Brand: Nokia Pages: 29
Nokia N71 Service Manual preview
N71
Brand: Nokia Pages: 35
Nokia NPS6113000 - Secure Access System Getting Started Manual preview
NPS6113000 - Secure Access System
Brand: Nokia Pages: 48
Nokia N73 - Smartphone 42 MB Service Manual & Parts Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 354
Nokia N73 - Smartphone 42 MB User Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 265
Nokia Network Voyager Reference Manual preview
Network Voyager
Brand: Nokia Pages: 700
Pioneer CNSD-239FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-239FM
Brand: Pioneer Pages: 28
Pioneer CNSD-230FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-230FM
Brand: Pioneer Pages: 28
Lowrance 6.2 Installation And Operation Instructions Manual preview
6.2
Brand: Lowrance Pages: 80
Lowrance 6.3 Installation And Operation Instructions Manual preview
6.3
Brand: Lowrance Pages: 108
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual preview
3CR15600 - Enterprise Management Suite
Brand: 3Com Pages: 218
FieldServer FS-8700-115 Instruction Manual preview
FS-8700-115
Brand: FieldServer Pages: 15
FieldServer FS-8700-16 Driver Manual preview
FS-8700-16
Brand: FieldServer Pages: 32
MACROMEDIA CONTRIBUTE 3-DEPLOYING CONTRIBUTE Manual preview
CONTRIBUTE 3-DEPLOYING CONTRIBUTE
Brand: MACROMEDIA Pages: 38
Yamaha VE Owner'S Manual preview
VE
Brand: Yamaha Pages: 33

Brands by name

Popular brands

Load more brands