Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 1072 / 2268

Material Component Door Component
2D Section/Elevation Linework Frame
2D Section/Elevation Linework Stop
2D Section/Elevation Linework Glass
Assigning Materials to a Door Style
Use this procedure to assign materials to the individual components of a door style. Components use the display
properties of the material. For more information, see “
About Door Display Components and Materials ” on page 1031.
You can specify the materials used to display the following components of a door style:
■
Frame
■
Stop
■
Panel
■
Glass
■
Muntin
NOTE If a material assignment does not determine the display properties of a door component, you can change the display
properties of the door style as described in
“ Specifying the Display Properties of a Door Style ” on page 1033 .
1 Open a tool palette that has a door tool.
2 Right-click a door tool, and click Door Styles.
3 Select the style you want to edit.
4 Click the Display Properties tab.
5 Select the display representation in which to display the changes, and select Style Override.
6 If necessary, click .
7 Click the Layer/Color/Linetype tab.
8 Select By Material for any component to which you want to assign a material, and click OK.
If the setting for By Material is not available, the display of this component cannot be determined by a
material.
9 Click the Materials tab.
10 Click the component you want to change, and select a different material definition.
You can select any material definition in the current drawing, or click to create a new material definition
and assign it to a component.
WARNING Although you can edit a material definition from this dialog box, any changes you make apply to
all objects that are assigned the material.
11 Click OK.
Adding Classifications to a Door Style
Use this procedure to specify classifications for definitions applied to a door style.
For more information about creating and applying classification definitions, see “ Classification Definitions ” on page
2096.
1 Open a tool palette that has a door tool.
2 Right-click a door tool, and click Door Styles.
1032 | Chapter 22 Doors