manualshive.com logo in svg

Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Introducing Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, a powerful software upgrade for AutoCAD 2005 users. Enhance your design capabilities with this comprehensive tool. Get started swiftly with the included Getting Started Manual. Download this user manual for free from manualshive.com to maximize your productivity and unleash your creativity.

Share
Download
background image

Restoring Object Points Set in the AEC Dimension Style

Use this procedure to restore dimension points that have been removed from an AEC dimension and that are set in
the AEC dimension style. Because the object points are set in the AEC dimension style, information about the type and
position of the removed point is still present in the AEC dimension style.

1

Select the dimension chain on which to restore a removed object point.

2

Verify that the removed point is visible:

Then…

If…

proceed to step 9.

the point removed is still visible as a crossed circle

make it visible by following steps 3 through 9.

the point removed is not visible as a crossed circle

3

Right-click, and click Object Display.

4

Click the Display Properties tab.

5

Select the display representation on which the changes should appear, and select Object Override.

The display representation in bold is the current one.

6

If necessary, click 

 .

7

Click the Layer/Color/Linetype tab.

8

Select the Removed Points Marker component, and turn on the setting for Visibility.

9

Click OK twice.

The removed dimension point on the dimension chain is now visible as a crossed circle.

10

If necessary, select the AEC dimension again, right-click, and click Remove Extension Lines.

11

Click the center of the circle for the dimension points to restore.

■

If the Update Added/Removed Points Immediately setting is selected, the selected points are deleted
immediately.

■

If the Update Added/Removed Points Immediately setting is cleared, the selected points are deleted
after you end the command.

For more information, see “

Specifying AEC Dimension Preferences

” on page 1853.

Removing and restoring object points on an AEC dimension

Removing Non-Style Defined Dimension Points

Use this procedure to remove dimension points that are not set in the AEC dimension style from an AEC dimension.
These can be points that are generated by picking object OSNAP points or by picking non-object associated points in
the drawing. Unlike style-defined dimension points, they cannot be restored once they are deleted, however, you can
recreate them if desired.

1868 | Chapter 40   AEC Dimensions

Summary of Contents for 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD

Samsung UN40C7000WF User Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Yamaha Add-On Effects Owner'S Manual preview
Add-On Effects
Brand: Yamaha Pages: 5
MACROMEDIA COLDFUSION 5-DEVELOPING Develop Manual preview
COLDFUSION 5-DEVELOPING
Brand: MACROMEDIA Pages: 438
ICP GDT monitor Manual preview
GDT monitor
Brand: ICP Pages: 60
Autodesk LANDXPLORER 2011 - SYSTEM REQUIREMENTS Manual preview
LANDXPLORER 2011 - SYSTEM REQUIREMENTS
Brand: Autodesk Pages: 3
F-SECURE ANTI-VIRUS FOR WINDOWS SERVERS 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR WINDOWS SERVERS 9.00
Brand: F-SECURE Pages: 48
Acer ASM 7 Faq preview
ASM 7
Brand: Acer Pages: 32
Acer Altos RAIDWatch Manual preview
Altos RAIDWatch
Brand: Acer Pages: 212
Autodesk AutoCAD Civil 3D 2013 User Manual preview
AutoCAD Civil 3D 2013
Brand: Autodesk Pages: 25
Autodesk ALIAS DESIGN Brochure preview
ALIAS DESIGN
Brand: Autodesk Pages: 12
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual preview
235B1-05A761-1301 - AutoCAD MEP 2010
Brand: Autodesk Pages: 878
Autodesk AUTOCAD 2006 Command Reference Manual preview
AUTOCAD 2006
Brand: Autodesk Pages: 1490
Ulead DVD MOVIEFACTORY 5 User Manual preview
DVD MOVIEFACTORY 5
Brand: Ulead Pages: 72
URC Total Control Mobile Installation & Programming preview
Total Control Mobile
Brand: URC Pages: 14
FujiFilm FINEPIX EX3.1 Quick Start Manual preview
FINEPIX EX3.1
Brand: FujiFilm Pages: 55
VBrick Systems Portal Server ETV v4.2 User Manual preview
Portal Server ETV v4.2
Brand: VBrick Systems Pages: 64
Zio Interactive Cassiopeia Pocket PC User Manual preview
Cassiopeia Pocket PC
Brand: Zio Interactive Pages: 17
Qlogic Fast Fabric User Manual preview
Fast Fabric
Brand: Qlogic Pages: 174

Brands by name

Popular brands

Load more brands