Ruijie RG-S29 Series, Справочник по командам

Страница: 1222 / 1510

Configuration Guide NFPP Commands
Parameter
Description
Parameter Description
number The maximum monitored host number, in the range from 1 to
4,294,967,295.
Defaults
The default is 20,000.
Command
Mode
NFPP configuration mode
Usage Guide If the monitored host number has reached the default 20,000, the administrator shall set the
max-number smaller than 20,000 and it will prompt the message that %ERROR: The value that you
configured is smaller than current monitored hosts 20,000, please clear a part of monitored hosts to
remind the administrator of the invalid configuration and removing the monitored hosts.
When the maximum monitored host number has been exceeded, it prompts the message that %
NFPP_DHCPV6_GUARD-4-SESSION_LIMIT: Attempt to exceed limit of 20000 monitored hosts to
remind the administrator.
Configuration
Examples
The following example sets the maximum monitored host number to 200.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcpv6-guard monitored-host-limit 200
Related
Commands
Command Description
show nfpp dhcpv6-guard summary Displays the configuration.
Platform
Description
N/A
21.32 dhcpv6-guard monitor-period
Use this command to configure the monitor time.
Use the no or default form of this command to restore the default setting.
dhcpv6-guard monitor-period seconds
no dhcpv6-guard monitor-period
default dhcpv6-guard monitor-period
Parameter
Description
Parameter Description
seconds Sets the monitor time, in the range from 180 to 86,400 in the unit of
seconds.
Defaults The default is 600 seconds.