Ruijie RG-S29 Series, Справочник по командам, Страница: 1085 / 1510

Configuration Guide Web Authentication Commands
template-name Sets the name of the customized authentication template.
Defaults No template is configured by default.
Command
Mode
Global configuration mode
Usage Guide You can enter the eportalv1 template mode to configure the IP address and URL instead of
executing the http redirect and http redirect homepage commands . The http redirect and http
redirect homepage commands are compatible on the device, which will be converted to this
command.
The original command portal-server is compatible on the device, which will be converted to this
command.
To ensure the Web authentication function, configure and apply a functional portal server. The
eportalv1 template is applied by default. The IP address, the URL and the communication secret key
of the eportalv1 template should be configured. If no URL format is specified, the default
http://[ ip-address ] format will be adopted. The IP address of the portal server is the network
resource exempted from authentication, so the unauthenticated user can access it. The device limits
the uplink traffic that accesses the IP address to prevent attacks. The upper limit is proportionate to
the number of the physical ports.
Configuration
Examples
The following example configures the eportalv1 template.
Ruijie(config)# web-auth template eportalv1
Ruijie(config.tmplt.eportalv1)#
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
5.38 web-auth update-interval
Use this command to set the interval at which the online user information is updated.
Use the no form of this command to restore the default setting.
web-auth update-interval { seconds }
no web-auth update-interval
Parameter
Description
Parameter Description
seconds Update interval in seconds, in the range from 30 to 3,600 in the unit of
seconds.