Ruijie RG-S29 Series, Справочник по командам

Страница: 1355 / 1510

Command Reference QoS Commands
2.17 service-policy
Use this command to apply the policy map to the interface, the virtual group or globally. Use the no or
default form of this command to remove the policy map.
service-policy { input | output } policy-map-name
no service-policy { input | output } policy-map-name
default service-policy { input | output } policy-map-name
Parameter
Description
Parameter Description
policy-map-name Policy map name
input Applies the policy map to the input direction.
output Applies the policy map to the output direction.
Defaults No policy map is configured on the interface or virtual group by default.
Command
Mode
Interface configuration mode, and virtual group configuration mode.
Usage Guide N/A
Configuration
Examples
The following example applies policy map
“po” to the input direction of interface GigabitEthernet 1/3.
Ruijie(config)# interface gigabitethernet 1/3
Ruijie(config-if-GigabitEthernet 1/3)# service-policy input po
The following example applies policy map
“po” to the output direction of virtual group 3.
Ruijie(config)# virtual-group 3
Ruijie(config-VirtualGroup)# service-policy output po
Related
Commands
Command Description
show mls qos interface policers Displays the policy map configuration on the interface.
show mls qos virtual-group
policers
Displays the policy map configuration on the virtual group.
Platform
Description
N/A
2.18 set
Use this command to configure the CoS, DSCP or VID value for the traffic. Use the no form of this
command to remove the CoS, DSCP or VID value from the traffic.
set { ip dscp new-dscp | cos new-cos [ none-tos ] | vid new-vid }