Ruijie RG-S29 Series, Справочник по командам

Страница: 986 / 1510

Configuration Guide RADIUS Commands
Defaults The default value of minutes is 0, that is, the device keeps sending requests to the unreachable
Radius server.
Command
Mode
Global configuration mode
Usage Guide If active Radius server detection is enabled on the device, the time parameter of this command does
not take effect on the Radius server. Otherwise, the Radius server becomes reachable when the
duration set by this command is shorter than the unreachable time.
Configuration
Examples
The following example sets the duration when the device stops sending requests to 1 minute.
Ruijie(config)# radius-server deadtime 1
Related
Commands
Command Description
radius-server host Defines the RADIUS security server.
radius-server dead-criteria
Defines the criteria to determine that a Radius
server is unreachable.
Platform
Description
N/A
2.16 radius-server host
Use this command to specify a RADIUS security server host.
Use the no form of this command to restore the default setting.
radius-server host { ipv4-address | ipv6-address } [ auth-port port-number ] [ acct-port
port-number ] [ test username name [ idle-time time ] [ ignore-auth-port ] [ ignore-acct-port ] ]
[ key [ 0 | 7 ] text-string ]
no radius-server host { ipv4-address | ipv6-address }
Parameter
Description
Parameter Description
ipv4-address IPv6 address of the RADIUS security server host.
ipv6-address IPv4 address of the RADIUS security server host.
auth-port UDP port used for RADIUS authentication.
port-numbe r
Number of the UDP port used for RADIUS authentication. If it is set to
0, this host does not perform authentication.
acct-port UDP port used for RADIUS accounting.
port-number
Number of the UDP port used for RADIUS accounting. If it is set to 0,
this host does not perform accounting.
test username name (Optional) Enables the active detection to the RADIUS security server