Ruijie RG-S29 Series, Справочник по командам

Страница: 946 / 1510

Configuration Guide AAA Commands
1 AAA Commands
1.1 aaa accounting commands
Use this command to configure NAS command accounting.
Use the no form of this command to restore the default setting.
aaa accounting commands level { default | list-name } start-stop method1 [ method2
…]
no aaa accounting commands level { default | list-name }
Parameter
Description
Parameter Description
level
The accounting command level, 0-15. The message shall be
recorded before which command level is executed is determined.
default
When this parameter is used, the following defined method list is
used as the default method for command accounting.
list-name
Name of the command accounting method list, which could be any
character strings.
method
It must be one of the keywords listed in the following table. One
method list can contain up to four methods.
none Does not perform accounting.
group
Uses the server group for accounting, the server group is
supported.
Defaults This function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
RGOS enables the accounting command function after enabling the login authentication. After
enabling the accounting function, it sends the command information to the security service.
The configured accounting command method must be applied to the terminal line that needs
accounting command; otherwise it is ineffective.
Configuration
Examples
The following example enables NAS command accounting.
Ruijie(config)# aaa accounting commands 15 default start-stop group
Related
Commands
Command Description
aaa new-model Enables the AAA security service.
aaa authentication Defines AAA authentication.
accounting commands
Applies the accounting commands to the
terminal line.