Ruijie RG-S29 Series, Справочник по командам

Страница: 1028 / 1510

Configuration Guide 802.1X Commands
Description N/A N/A
Defaults This function is disabled by default.
Command
Mode
Interface configuration mode
Usage Guide Use the show dot1x command to display the 802.1X configuration.
Configuration
Examples
The following example configures the 802.1X authentication on the port.
Ruijie(config-if-GigabitEthernet 0/0)# dot1x port-control auto
Related
Commands
Command Description
show dot1x Displays the 802.1X information.
Platform
Description
N/A
4.35 dot1x port-control-mode
By default, 802.1x adopts MAC address-based control mode. In this mode, only authenticated users
have access to the network, while other users that connect to the same port cannot access the
network. In the port-based control mode, however, if one user that connects to the port passes the
authentication, this port becomes an authenticated port and all the users that connect to this port
have access to the network. In the port-based single-user control mode, the port is authenticated
when it allows only one authenticated user who is enabled to use the network normally. If you find
other users on the port, you should clear all the users on the port and re-authenticate. The
authentication mode can be configured using the following commands
dot1x port-control-mode { mac-based | port-based | port-based single-host}
no dot1x port-control-mode
Parameter
Description
Parameter Description
mac-based Enable the MAC address-based control.
port-based
Enable port-based control.
port-based single-host Enable single host-based control.
Defaults MAC address-based access control is used by default.
Command
Mode
Interface configuration mode.
Usage Guide Use the show dot1x port-control command to show the 802.1X configuration for the port.
Single-host is port-based single-user 802.1x access control. Use show dot1x port-control to display
port-based and use show running-config to display dot1x port-control-mode port-based single-host.