Ruijie RG-S29 Series, Справочник по командам

Страница: 752 / 1510

Command Reference OSPFv2 Commands
Forward Address: 0.0.0.0
External Route Tag: 0
The following table describes the fields in the output of the show ip ospf database external
command.
Field Description
OSPF Device with ID Displays the router ID.
Type-5 AS External
Link States
Displays autonomous external LSA information.
LS age Displays the keepalive period of the LSA.
Options Option
LS Type Displays the type of the LSA.
Link State ID Displays the link ID of the LSA.
Advertising Router Displays the device advertising the LSA
LS Seq Number Displays the sequence number of the LSA.
Checksum Displays the checksum of the LSAs.
Length Displays the length (in bytes) of the LSA.
Network Mask
Displays the network mask of the route corresponding to the
LSA.
Metric Type Indicates the external link type.
TOS TOS value, which can be 0 only now.
Metric Displays the metric of the route corresponding to the LSA.
Forward Address
IP address through which traffic is forwarded to the destination
network. If this address is 0.0.0.0, the data traffic will be
forwarded to the device that generates the link state.
External Route Tag
External route tag. Each external route has a 32-byte route
tag. The OSPF does not use the route tag by itself, but it will
be used by other routing processes to redistribute OSPF
routes.
The following example displays the output of the show ip ospf database network command:
Ruijie# show ip ospf database network
OSPF Router with ID (1.1.1.1) (Process ID 1)
Network Link States (Area 0.0.0.0)
LS age: 572
Options:0x2 (*|-|-|-|-|-|E|-)
LS Type:network-LSA
Link State ID:192.88.88.27 (address of Designated Router)
Advertising Router:1.1.1.1
LS Seq Number: 80000001
Checksum:0x5366
Length: 32
Network Mask: /24