Ruijie RG-S29 Series, Справочник по командам

Страница: 835 / 1510

Command Reference RIPng Commands
Ruijie(config-router)# graceful-restart grace-period 90
Verification Run the show ipv6 rip command to check whether the GR function is configured and query the configured
grace period.
Prompts
N/A
Common
Errors
N/A
Platform
Description
N/A
4.6 ipv6 rip default-information
Use this command to generate a default IPv6 route to the RIPng. Use the no form of this command to
remove the default route.
ipv6 rip default-information { only | originate } [ metric metric-value ]
no ipv6 rip default-information
Parameter
Description
Parameter Description
only Advertises the IPv6 default route only.
originate Advertises both of the IPv6 default route and other routes.
metric metric-value
Sets the metric value for the default route. The valid range is from 1 to
15. The default metric is 1.
Defaults
By default, no default route is configured.
Command
mode
Interface configuration mode
Usage Guide
With this command configured on an interface, the interface advertises an IPv6 default route and the
route itself is not to join the device route forwarding table and the RIPng route database.
To avoid the route loop, once this command has been configured on the interface, RIPng refuses to
receive the default route update message advertised from the neighbor.
Configuration
Examples
The following example shows how to create a default route to the RIPng routing process on the
interface ethernet0/0 and enable this interface to advertise the default route only:
Ruijie(config)# interface ethernet 0/0
Ruijie(config-if)# ipv6 rip default-information only
Related
Commands
Command Description