• Installs into any single gang device back-box.
• Supports Multi-gang installations.
• Requires
Decora
®
faceplate, sold separately
WARNINGS
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT
BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with appropriate electrical codes and
regulations.
• If you are unsure about any part of these instructions, consult an electrician.
CAUTIONS
• Use this device with
copper or copper clad wire only.
• For indoor applications only.
• Save these instructions.
DI-000-ZS10S-02B
© 2019 Leviton Mfg. Co., Inc.
WARNING
:
TO AVOID FIRE, SHOCK, OR DEATH;
TURN OFF POWER at circuit breaker or fuse and
test that power is off before wiring!
1.
Connect as per wiring diagram.
Before Installation
Installation
2.
Attach to wall box.
3.
Restore power and test ON/OFF operation. LED locator light
should be ON when switch power is turned OFF.
RF Wall Switch
Cat. No. ZS10S
Ratings: 120-277VAC, 50/60Hz.
INSTALLATION AND QUICK START SHEET
ENGLISH
DI-000-ZS10S-02B
Line
120/277VAC,
50/60Hz.
Blue
White
Hot (Black)
Black
Neutral (White)
White
Load
Green
Ground
To release, push sides.
Line up and press in to attach.
4.
If desired, change switch color.
5.
Install Decora faceplate.
White
Blue
Green
Black
Load
Neutral
Line (Hot)
Ground
WEB
VERSION
