DI-000-ZS10S-02B
© 2019 Leviton Mfg. Co., Inc.
SPECIFICATIONS
Catalog No.
ZS10S-D0Z
Input Voltage/Frequency
120-277VAC, 50/60Hz.
Input Current
120V
Standby: 0.2W
Max: 0.5W+Load Current
277V
Standby: 0.3W
Max: 0.6W+Load Current
Load Ratings
LED, CFL, Electronic Ballast @ 120V
10A
LED, CFL, Electronic Ballast @ 277V
10A
Magnetic Ballast @ 120V
10A
Magnetic Ballast @ 277V
10A
Resistive, Tungsten @ 120V
6.67A
Resistive, Tungsten @ 277V
6.67A
Motor @ 120V
1/4Hp (FLA 5.8A)
Motor @ 277V
1/3Hp (FLA 3.0A)
IP Rating
IP10
Network Connections
IEEE 802.15.4, 2.4Ghz, wireless, mesh network
up to 75' range between device
Operating Temperature
0°C - 40°C (32°F - 104°F)
Storage Temperature
-40°C to 85°C
UL Pollution Degree
2
UL Impulse Voltage
6000V
FCC COMPLIANCE STATEMENT:
FCC ID: QGH-B167602
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) This device may not cause harmful interference
(ii.) This device must accept any interference received, including interference that may
FDXVHXQGHVLUHGRSHUDWLRQ$Q\FKDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\
Leviton could void the user’s authority to operate this equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA COMPLIANCE STATEMENT:
IC: 2473A-B167602
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
RSHUDWLRQRIWKHGHYLFH,03257$17$Q\FKDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\
approved by the party responsible for compliance could void the user’s authority to operate
this equipment. This Class B digital apparatus complies with Canadian ICES-003.
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper
use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option.
For details visit www.leviton.com or call 1-800-824-3005.
This warranty
excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose
, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a
particular purpose, is limited to two years.
Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation
. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
Installation (cont'd)
Installation (cont'd)
&RQ¿JXUDWLRQDQG3URJUDPPLQJ
• Control functionality, LED Behavior, and user interaction can be adjusted based on the features of your system. Please refer to your system
documentation for details.
• Enrollment – Out of the box, the device is in Auto Join mode and is always active and attempting to join an open network. If you need to add your
device to a network and it is not in auto join mode, reset to factory default and it will start searching for a network.
o
Locator LED will blink GREEN slowly while looking for an open network.
• Factory Default – resets device to out of the box state
o
Push top or bottom of paddle for approximately 20 seconds
XQWLOWKHORFDWRU/('À
ashes AMBER the second time.
o
Release paddle.
o
LEDs will alternate between green/amber while device is resetting, and turn off when complete.
o
When complete, device will reboot then revert to auto join mode where it is searching for a network to join. Locator LED will blink GREEN slowly
while looking for an open network.
• Status Check
o
Push top or bottom of paddle for 5 seconds until the locator LED
ÀDVKHV$0%(5RQFH
o
Release paddle.
o
The locator LED will blink to indicate device state.
2QH5('EOLQNGHYLFHXQFRQ¿JXUHG
Three GREEN blinks: Connected to network, network formed.
• NOTE
: holding the top or bottom of the paddle for 25 seconds or greater will abandon all programming and return to normal operation. You will know
\RX¶YHKLWWKHVHFRQGPDUNEHFDXVHWKHORFDWRU/('ZLOOÀDVK$0%(5WKHWKLUGWLPH
LOCATOR LED
- on when switch is
RIIVR\RXFDQ¿QG\RXUFRQWURO
PADDLE BOTTOM
- OFF
PROGRAMMING
Can be performed by pressing the
top OR bottom of switch.
PADDLE TOP
- ON
6.
Enroll Device. Using your system, you may be able to program different
functionality, such as pushing the top of the paddle for a presentation
scene or pushing the bottom of the paddle for OFF.
RF EXPOSURE AND CO-LOCATION:
To comply with FCC OET Bulletin 65 and ISED RF exposure limits for general population
/ uncontrolled exposure this device should be installed and operated with a minimum
distance of 7.9 inches (20 cm) between the radiator and your body. This transmitter must
not be co-located or operated in conjunction with any other antenna or transmitter.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at
Leviton Manufacturing of Canada ULC
to the attention of the
Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or
1-800-405-5320 (Canada Only) www.leviton.com
WEB
VERSION
