Ruijie RG-S29 Series, Справочник по командам

Страница: 1107 / 1510

Configuration Guide Port Security Commands
3 -- -- Gi0/1 ffaa:ddcc::1 ipv6-only
activ
Field Description
NO. Serial number.
Vlan VLAN ID.
Mac Address MAC address.
Port Port name.
IpAddress IP address.
FilterType The filtering type of the port security binding.
FilterStatus The status of the port security binding.
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
9.2 switchport port-security
Use this command to configure port security and the way to deal with violation.
Use the no form of this command to restore the default setting.
switchport port-security [ violation { protect | restrict | shutdown } ]
no switchport port-security [ violation ]
Parameter
Description
Parameter Description
protect Discards the packets breaching security.
restrict Discards the packets breaching security and sends the Trap
message.
shutdown Discards the packets breaching the security, sends the Trap
message and disables the interface.
Defaults This function is disabled by default.
Command
Mode
Interface configuration mode
Usage Guide With port security, you can strictly control the input on a specific port by restricting access to the MAC
address and IP address (optional) of the port on the switch. After you configure some secure
addresses for the port security-enabled port, only the packets from these addresses can be
forwarded. In addition, you can also restrict the maximum number of secure addresses on a port. If
you set the maximum value to 1 and configure one secure address for this port, the workstation