Ruijie RG-S29 Series, Справочник по командам

Страница: 151 / 1510

Command Reference Syslog Commands
logging count
no logging count
Parameter
Description
Parameter Description
N/A N/A
Defaults The log statistics function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide This command enables the log statistics function. The statistics begins when the function is enabled.
If you run the no logging count command, the statistics function is disabled and the statistics data is
deleted.
Configuration
Examples
The following example enables the log statistics function:
Ruijie(config)# logging count
Related
Commands
Command Description
show logging count Displays log information about modules of the system.
show logging
Displays basic configuration of log modules and log
information in the buffer.
Platform
Description
N/A
8.6 logging delay-send file
Use this command to set the name of the log file saved locally for delay sending. Use the no form of
this command to restore the default setting.
logging delay-send file flash : filename
no logging delay-send file
Parameter
Description
Parameter Description
flash: filename Sets the name of the log file saved locally for delay sending.
Defaults The default name format is as follows: file size_device IP address_index.txt. If you want to change the
file name, the file sent to the remote server should be named as follows: prefix_ file size_device IP
address_index.txt; the file saved locally should be named as follows: prefix_index.txt. The default
prefix is syslog_ftp_server.