Ruijie RG-S29 Series, Справочник по командам

Страница: 1259 / 1510

Configuration Guide NFPP Commands
Mode
Usage Guide
N/A
Configuration
Examples
The following example sets the isolate period in the interface configuration mode.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp ip-guard isolate-period 180
Related
Commands
Command Description
ip-guard isolate-period Sets the global isolate period.
show nfpp ip-guard summary Displays the configuration.
Platform
Description
N/A
21.77 nfpp ip-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
Use the no or default form of this command to restore the default setting.
nfpp ip-guard policy { per-src-ip | per-port } rate-limit-pps attack-threshold-pps
no nfpp ip-guard policy { per-src-ip | per-port }
default nfpp ip-guard policy { per-src-ip | per-port }
Parameter
Description
Parameter Description
per-src-ip
Sets the rate-limit threshold and the attack threshold for each source
IP address.
per-port Sets the rate-limit threshold and the attack threshold for each port.
rate-limit-pps Sets the rate-limit threshold, in the range from 1 to 19,999.
attack-threshold-pps Sets the attack threshold, in the range from 1 to 19,999.
Defaults By default, the rate-limit threshold and the attack threshold are not configured.
Command
Mode
Interface configuration mode
Usage Guide The attack threshold value shall be equal to or greater than the rate-limit threshold.
Configuration
Examples
The following example sets the rate-limit threshold and the attack threshold.
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp ip-guard policy per-src-ip 2 10
Ruijie(config-if)# nfpp ip-guard policy per-port 50 100