Ruijie RG-S29 Series, Справочник по командам

Страница: 378 / 1510

Command Reference MSTP Commands
Configuration
Examples
This example sets the priority of gigabitethernet 1/1 to 10 in instance 20.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if-interface-id)# spanning-tree mst 20 port-priority 0
Related
Commands
Command Description
show spanning-tree mst
Displays the MSTP information of an interface.
spanning-tree mst cost Sets the path cost.
spanning-tree mst priority Sets the device priority for different instances.
Platform
Description
N/A
9.33 spanning-tree mst priority
Use this command to set the device priority for different instances in the global configuration mode.
Use the no form of this command to restore the default setting.
spanning-tree [ mst instance-id ] priority priority
no spanning-tree [ mst instance-id ] priority
Parameter
Description
Parameter Description
instance-id
Instance ID, in the range of 0 to 64
priority
Device priority. Sixteen integers are available: 0, 4096, 8192, 12288,
16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056,
49152,53248, 57344 and 61440, which are all multiples of 4096.
Defaults The default instance ID is 0.
The default device priority is 32768.
Command
Mode
Global configuration mode.
Usage Guide Configure the switch priority to determine a device as the root of the entire network and to determine
the topology of the entire network.
Configuration
Examples
The following example sets the device priority of the Instance to 8192.
Ruijie(config)# spanning-tree mst 20 priority 8192
Related
Commands
Command Description
show spanning-tree mst
Displays the MSTP information of an interface.
spanning-tree mst cost Sets path cost.