Ruijie RG-S29 Series, Справочник по командам

Страница: 1063 / 1510

Configuration Guide Web Authentication Commands
5.11 http redirect port
Use this command
to redirect users’ HTTP redirection request to a certain destination port.
Use the no form of this command to restore the default setting.
http redirect port port-num
no http redirect port port-num
Parameter
Description
Parameter Description
port-num Destination port of the HTTP request
Defaults The default is port 80.
Command
Mode
Global configuration mode
Usage Guide When you access the network resource, you send HTTP packets. The access device can intercept
such HTTP packets to detect your access. If the access device detects that an unauthenticated user
is accessing the network resource, it stops the users with an authentication page/client download
page.
By default, the access device intercepts users’ HTTP packets with port 80 to check whether they are
accessing network resources.
This command is used to change the destination port of HTTP packets that are intercepted by the
access device.
Up to 10 ports can be configured, including port 80.
Configuration
Examples
The following example redirects
users’ HTTP requests with port 8080.
Ruijie(config)# http redirect port 8080
The following example does not
redirect users’ HTTP requests with port 80.
Ruijie(config)# no http redirect port 80
Related
Commands
Command Description
show http redirect
Displays the HTTP redirection configuration.
Platform
Description
N/A
5.12 http redirect session-limit
Use this command to set the total number of HTTP sessions that can be originated by an
unauthenticated user, or the maximum number of HTTP sessions that can be originated by an
unauthenticated user connected to each port.