Ruijie RG-S29 Series, Справочник по командам

Страница: 1314 / 1510

Command Reference ACL Commands
Command
mode
Global or interface configuration mode.
Usage Guide
Use this command to control access to a specified interface, globally.
Configuration
Examples
The following example applies the ACL 120 on interface fastEthernet0/0 to filter the incoming
packets:
Ruijie(config)# interface fastEthernet 0/0
Ruijie(config-if)# ip access-group 120 in
Related
Commands
Command Description
access-list Defines an ACL.
show access-lists Displays all ACLs.
Platform
Description
N/A
1.16 ip access-list
Use this command to create a standard IP access list or extended IP access list. Use the no form of
the command to remove the access list.
ip access-list { extended | standard } { id | name }
no ip access-list { extended | standard } { id | name }
Parameter
Description
Parameter Description
id
Access list number:
Standard: 1 to 99, 1300 to 1999;
Extended: 100 to 199, 2000 to 2699.
name Name of the access list
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide Configure a standard access list if you need to filter on source address only. If you want to filter on
anything other than source address, you need to create an extended access list.
Refer to deny or permit in the two modes. Use the show access-lists command to display the ACL
configurations .
Configuration The following example creates a standard access list named std-acl.