Ruijie RG-S29 Series, Справочник по командам, Страница: 907 / 1510

Command Reference Protocol-independent Configuration Commands
6.40 set tag
Use this command to set the tag for the routes to be redistributed. Use the no form of this command to
remove the setting.
set tag tag
no set tag
Parameter
description
Parameter Description
tag Tag of the route to be redistributed
Default
configuration The original routing tag remains unchanged.
Command
mode Route map configuration mode
Usage
guideline
This command can only be used for route redistribution. If this command is not configured, the default
route tag is used.
Examples
The following example enables the OSPF routing protocol to redistribute the RIP route and sets the
tag as 100.
Ruijie(config)# router ospf
Ruijie(config-router)# redistribute rip subnets route-map redrip
Ruijie(config-router)# network 192.168.12.0 0.0.0.255 area 0
Ruijie(config-router)# exit
Ruijie(config)# route-map redrip permit 10
Ruijie(config-route-map)# set tag 100
Related
commands
Command Description
match interface
Match the interface.
match ip address Match the IP address.
match ip next-hop Match the next-hop IP address.
match ip route-source
Match the source IP address.
match metric Match the metric.
match route-type Match the route type.
match tag Match the tag.
set metric
Set the metric.
set metric-type Set the metric type.
6.41 show ip as-path-access-list
Use this command to display the configuration of AS path access lists.