Ruijie RG-S29 Series, Справочник по командам

Страница: 867 / 1510

Command Reference Protocol-independent Configuration Commands
Related
commands
Command Description
match community Match the community list.
set community-list delete
Remove the community value of the BGP path according to
the community list.
show ip community-list Show the community list information.
6.4 ip extcommunity-list
Use this command to create an extcommunity list and add an entry to the list. Use the no form of this
command to remove the setting.
ip extcommunity-list { expanded-list | expanded list-name } { permit | deny } [ regular-expression ]
ip extcommunity-list { standard-list | standard list-name } { permit | deny } [ rt value ] [ soo value ]
no ip extcommunity-list { expanded-list | expanded list-name | standard-list | standard list-name }
ip extcommunity-list { expanded-list | expanded list-name | standard-list | standard list-name }
no ip extcommunity-list { expanded-list | expanded list-name | standard-list | standard list-name }
Parameter
description
Parameter Description
expand-list
Indicates an extended extcommunity list, ranging from 100 to
199. One extcommunity list may contain multiple rules.
standard-list
Indicates a standard extcommunity list, ranging from 1 to 99. One
extcommunity list may contain multiple rules.
expanded list-name
Indicates the name of an extended extcommunity, comprising not
more than 32 characters. When using this parameter, you enter
the extcommunity list configuration mode.
standard list-name
Indicates the name of a standard extcommunity list, comprising
not more than 32 characters. When using this parameter, you
enter the extcommunity list configuration mode.
permit Defines an extcommunity rule for permitting.
deny Defines an extcommunity rule for denying.
regular-expression
(optional) Defines a matching template that is used to match an
extcommunity.
sequence-number
(Optional) Defines the sequence number of a rule, ranging from 1
to 2,147,483,647. If no sequence number is specified, the
sequence number automatically increases by 10 when a rule is
added by default. The initial number is 10.
rt
(Optional) Sets the RT attribute value. This command can be
used only for the standard extcommunity configuration, but not
for the extended extcommunity configuration.
soo
(Optional) Sets the SOO attribute value. This command can be
used only for the standard extcommunity configuration, but not
for the extended extcommunity configuration.
value Indicates the value of an extended community