Ruijie RG-S29 Series, Справочник по командам

Страница: 897 / 1510

Command Reference Protocol-independent Configuration Commands
3: internet
2: network
1: priority
0: routine
critical | flash |
flash-override | immediate
| internet | network |
priority | routine
Priority of an IP header.
Defaults N/A
Command
mode Route map configuration mode
Usage
guideline
With different precedence values for the IP packet head configured, the IP packets matching the
PBR routing are sent according to the different precedence values.
Multiple set ip precedence commands can be executed in the route map configuration rule, but only
the last one takes effect, and the precedence will be specified for the head of the IP packet matched
the PBR.
Examples
The following example sets the precedence of the packet with the source IP address
192.168.217.68 received at the interface FastEthernet 0/0 as 4:
Ruijie(config)#access-list 1 permit 192.168.217.68 0.0.0.0
Ruijie(config)#route-map name
Ruijie(config-route-map)#match ip address 1
Ruijie(config-route-map)#set ip precedence 4
Ruijie(config)#interface FastEthernet 0/0
Ruijie(config-if)#ip policy route-map name
Related
commands
Command Description
match interface
Match the next-hop interface.
match ip address Match the IP address in the ACL.
match ip next-hop Match the next-hop IP address in the ACL.
match ip route-source
Match the route source IP address in the ACL.
match metric Match the route metric value.
match route-type Match the route type.
match tag Match the route tag value.
set metric-type
Set the type of redistributed route.
set tag Set the tag value of redistributed route.
set ip tos Set the tos for the IP packet head.