Ruijie RG-S29 Series, Справочник по командам

Страница: 695 / 1510

Command Reference OSPFv2 Commands
Description
2.4 area filter-list
Use this command to filter the inter-area routes on the ABR. Use the no form of this command to
restore the default setting.
area area-id filter-list { access acl-name | prefix prefix-name } { in | out }
no area area-id filter-list { access acl-name | prefix prefix-name } { in | out }
Parameter
Description
Parameter Description
area-id Area ID
acl-name Name of an Access Control List ( ACL )
prefix-name Prefix-list name
in | out Applies the ACL rule to the routes incoming/outgoing the area.
Defaults No filtering is configured by default.
Command
Mode Routing process configuration mode
Usage Guide This command can be configured only on an ABR.
You can use this command when it is required to filter the inter-area routes on the ABR.
Configuration
Examples
The following example sets area 1 to learn only the inter-area routes of 172.22.0.0/8.
Ruijie# configure terminal
Ruijie(config)# access-list 1 permit 172.22.0.0 0.255.255.255
Ruijie(config)# router ospf 100
Ruijie(config-router)# area 1 filter-list access 1 in
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
2.5 area nssa
Use this command to set an OSPF area as an NSSA in routing process configuration mode. Use the
no form of this command to delete the NSSA or the NSSA configuration.
area area-id nssa [ no-redistribution ] [ default-information-originate [ metric value ]
[ metric-type type ] ] [ no-summary ] [ translator [ stability-interval seconds | always ] ]