Ruijie RG-S29 Series, Справочник по командам, Страница: 1131 / 1510

Configuration Guide GSN Commands
12 GSN Commands
12.1 security address-bind enable
Use this command to enable GSN address binding on an interface.
Use the no form of this command to disable this function.
security address-bind enable
no security address-bind enable
Parameter
Description
Parameter Description
N/A N/A
Defaults GSN address binding is disabled.
Command
Mode
Interface configuration mode
Usage Guide This command takes effect only when the global security network (GSN) function is enabled and the
interface is authenticated.
802.1x IP authorization should be disabled when the GSN address binding policy is applied.
Configuration
Examples
The following example enables GSN address binding on GigabitEthernet 0/3.
Ruijie# configure terminal
Ruijie(config)# interface gigabitEthernet 0/3
Ruijie(config-if-GigabitEthernet 0/3)# security address-bind enable
Ruijie(config)# exit
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
12.2 security community
Use this command to configure the security community to communicate with the SMP server.
Use the no form of this command to remove the security community setting.
security { [ v1 | v2 ] community community | v3 user username }
no security { [ v1 | v2 ] community community | v3 user username }