Ruijie RG-S29 Series, Справочник по командам

Страница: 1344 / 1510

Command Reference QoS Commands
no drr-queue bandwidth
default drr-queue bandwidth
Parameter
Description
Parameter Description
weight1...weight8 8 queue weights. The default queue weight ratio is 1:1:1:1:1:1:1:1.
For the products supporting the SP scheduling policy, the weight
range is from 0 to 15.
For the products not supporting the SP scheduling policy, the weight
range is from 1 to 15.
Defaults The default queue weight ratio is 1:1:1:1:1:1:1:1.
Command
Mode
Global configuration mode or interface configuration mode
Usage Guide N/A
Configuration
Examples
The following example configures the DRR queue weight ratio to 1:1:1:2:2:4:6:8.
Ruijie(config)# drr-queue bandwidth 1:1:1:2:2:4:6:8
Related
Commands
Command Description
show mls qos queuing Displays information about the queue.
Platform
Description
N/A
2.4 match
Use this command to define a match criteria in class map configuration mode. Use the no form of this
command to remove the match criteria.
match { access-group access_list | ip { dscp dscp-vlaue-list | precedence pre-vlaue-list } }
no match { access-group access_list | ip { dscp dscp-vlaue-list | precedence pre-vlaue-list } }
Parameter
Description
Parameter Description
access-group access_list Identifies a numbered or named access list as the match criteria.
ip dscp dscp-vlaue-list
Identifies DSCP values as the match criteria. Multiple DSCP can be
configured. The range is from 0 to 63.
ip precedence pre-vlaue-list Identifies IP precedence values as the match criteria. Multiple IP
precedence can be configured. The range is from 0 to 7.
Defaults None
Command Class map configuration mode