Ruijie RG-S29 Series, Справочник по командам

Страница: 1234 / 1510

Configuration Guide NFPP Commands
not 0, the software-monitored attacker will be auto-isolated by the hardware and the timeout time will
be the isolate period. The monitor period is valid with the isolate period 0.
If the isolate period has changed to be 0, the attackers on the interface will be removed rather than
being monitored by the software
Configuration
Examples
The following example sets the monitor time to 180 seconds.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard monitor-period 180
Related
Commands
Command Description
show nfpp ip-guard summary Displays the configuration.
show nfpp ip-guard hosts Displays the monitored host list.
clear nfpp ip-guard hosts Clears the isolated host.
Platform
Description
N/A
21.46 ip-guard monitored-host-limit
Use this command to set the maximum monitored host number.
Use the no or default form of this command to restore the default setting.
ip-guard monitored-host-limit number
no ip-guard monitored-host-limit
default ip-guard monitored-host-limit
Parameter
Description
Parameter Description
number The maximum monitored host number, in the range from 1 to
4,294,967,295.
Defaults
The default is 20,000 seconds.
Command
Mode
NFPP configuration mode
Usage Guide If the monitored host number has reached the default 20,000, the administrator shall set the
max-number smaller than 20,000 and it will prompt the message that %ERROR: The value that you
configured is smaller than current monitored hosts 20,000, please clear a part of monitored hosts to
remind the administrator of the invalid configuration and removing the monitored hosts.
When the maximum monitored host number has been exceeded, it prompts the message that %
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit of 20,000 monitored hosts to
remind the administrator.