manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 803

Command Reference

R&S

®

 ZNB/ZNBT

803

User Manual 1173.9163.02 ─ 53

Suffix: 

<Ph_pt>

.

This suffix is ignored.

Parameters:

<MaxFrequency>

Default unit: Hz

Manual operation: 

See 

"Max Freq to Deembed"

 

on page 591

CALCulate:FMODel:ISD<Ph_pt>:SCALe:FTIMe 

<FltLeadInScalingTime>

Overrides the lead-in’s flight time in case the through-trace test coupon is a bit too
short or too long.

Sets/gets the 

atten_scale 1

 batch mode parameter of the ISD tool.

Suffix: 

<Ph_pt>

.

This suffix is ignored.

Parameters:

<FltLeadInScalingTime>

Manual operation: 

See 

"Scaling for Flt Tm"

 

on page 589

CALCulate:FMODel:ISD<Ph_pt>:TRACe:COUPling 

<TraceCoupling>

Tells the ISD tool about coupling among lead-in traces.

Corresponds to the 

coupling

 batch mode parameter of the ISD tool.

Suffix: 

<Ph_pt>

.

This suffix is ignored.

Parameters:

<TraceCoupling>

NONE | WEAK | STRong
NONE: no coupling.
WEAK: coupling will be extracted even if there are 2 ports
enabled on the test coupon
STRong: if the test coupon is a 4-port file, and there are two
ports to be extracted, the ISD tool will optimize odd- and even-
mode insertion losses

Manual operation: 

See 

"Trace Coupling"

 

on page 591

CALCulate:FMODel:REName 

<Boolean>

If set to ON (1), the names of subsequently generated "Test Coupon" and "DUT + Test
Fixture" files are prefixed with the current date and time.

Parameters:

<Boolean>

Manual operation: 

See 

"Timestamp Filenames"

 

on page 584

SCPI Command Reference

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands