GUI Reference
R&S
®
ZNB/ZNBT
708
User Manual 1173.9163.02 ─ 53
Select some matrices and tap "OK" to remove them from the RF connection configura-
tion or tap "Cancel" to quit the dialog without removing a switch matrix from the RF
connection configuration.
Delete All
Opens a confirmation dialog
Either tap "OK" to remove all switch matrices from the RF connection configuration or
tap "Cancel" to quit the dialog without removing a switch matrix.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix:DELete
Renumber Test Ports
Applies a default test port assignment to the available matrix test ports and VNA ports.
You can use this function at any time to number the used test ports in ascending order,
e.g. after editing port connections. Note however that in general this will not preserve
any manually created test port connections.
Remote command:
n.a.
Edit Matrix VNA Port Connections
To edit a matrix VNA port connection, tap on the corresponding port symbol.
Setup Softtool
