manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 715

Remote Control

R&S

®

 ZNB/ZNBT

715

User Manual 1173.9163.02 ─ 53

Example controller programs can be obtained from the Rohde & Schwarz support cen-
ters. However, it can be preferable to integrate the controller program into post-pro-
cessing tools (e.g. Microsoft Excel) to list, draw, or manipulate the measured values
retrieved from the analyzer.

The following tools can make remote control more comfortable and faster: 

 

●

Various software tools provide an easy-to-use graphical user interface for remote
control. An example is the "GPIB Explorer" (also termed "IECWIN32") which is pre-
installed on the analyzer. See 

Chapter 7.1.3, "GPIB Explorer"

, 

on page 715.

●

Instrument drivers provide an improved interface between the test software and the
test instruments. They perform the actual control of the instrument using higher-
level functions for operations such as configuring, reading from, writing to, and trig-
gering the instrument. Hence, drivers can reduce development time, eliminating the
need to learn the specific command set for each instrument. In general, program
development is further simplified by a graphical program environment.
Rohde & Schwarz offers various R&S

 

ZNB/ZNBT driver types (LabView, LabWind-

ows/CVI, IVI, VXIplug&play...) for different programming languages. The drivers are
available free of charge on the product pages in the R&S internet, along with instal-
lation information.

7.1.3

 

GPIB Explorer

The GPIB Explorer is a software tool that allows you to connect to the analyzer, and to
obtain an overview of all implemented remote control commands. You can use it to
compile and run test scripts. The program can be opened from the Windows

®

 start

menu: "Programs – R&S Vector Network Analyzer – GPIB Explorer" or via SYSTEM –
[APPLIC] "External Tools " > "GPIB Explorer". You can also start the executable file

iecwin32.exe

 in the program directory of the network analyzer (e.g.

C:\Program Files\Rohde-Schwarz\Vector Network Analyzer\ZNB\Bin

). 

 

After the GPIB Explorer is started, the interface and protocol for the connection to the
instrument can be selected in a dialog:

The following options are provided:

●

NT named pipe

 (currently not supported)

Introduction to Remote Control

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands