manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 421

GUI Reference

R&S

®

 ZNB/ZNBT

421

User Manual 1173.9163.02 ─ 53

Remote command: 

SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:ALL?
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess

Characterization

Displays all characterizations that are stored in the active cal unit. The "Factory" char-
acterization is available for all calibration units; it ensures an accurate calibration for all
standard applications. To account for modifications of the cal unit such as the connec-
tion of additional adapters, you can generate modified sets of characterization data
using the cal unit characterization wizard. See 

Chapter 6.11.2.3, "Characterize Cal Unit

Dialog"

, 

on page 486. By default, the R&S

 

ZNB/ZNBT uses the last generated cal unit

characterization.

Tip:

 If the characterization wizard is password-protected, the "Characterization" button

is unavailable. Use this functionality to prevent inadvertent activation of inappropriate
characterizations. See 

"Authentication"

 

on page 487.

See also 

Chapter 5.5.5.3, "Characterization of Calibration Units"

, 

on page 171.

Remote command: 

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:STANdard:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?

Query further cal unit properties:

SYSTem:COMMunicate:RDEVice:AKAL:DATE?
SYSTem:COMMunicate:RDEVice:AKAL:FRANge?
SYSTem:COMMunicate:RDEVice:AKAL:PORTs?
SYSTem:COMMunicate:RDEVice:AKAL:WARMup[:STATe]?

Calibration Type / Source

Selects the calibration type for the selected physical ports. For an overview, refer to

Table 5-7

.

The reflection calibration types can be used for any combination of physical ports:
reflection calibrations are performed for each selected port.

A transmission calibration type requires at least two physical ports. For the 

unidirec-

tional

 transmission calibration types ("Trans Norm", "One Path Two Ports"), the direc-

tion (

"Source"

 port) must be specified in addition.

Note:

 Transmission normalization and "One Path Two Ports" calibration types require

two-port (Through) characterization data for the cal unit.For current calibration units,
however, these two-port characterizations are typically not part of the factory character-
ization. If a tooltip indicates missing two-port characterization data, simply perform a
new characterization of your cal unit. In the first dialog of the "Characterization" wizard,
select "Take All OSM and Through" to make sure that the necessary two-port data is
acquired. See also 

"Characterization Wizard"

 

on page 488.

Remote command: 

[SENSe<Ch>:]CORRection:COLLect:AUTO:TYPE
[SENSe<Ch>:]CORRection:COLLect:AUTO:PORTs:TYPE
[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure

Cal Softtool

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands