manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 688

GUI Reference

R&S

®

 ZNB/ZNBT

688

User Manual 1173.9163.02 ─ 53

6.17.3.1

 

Controls on the Remote Settings Tab

IP Address

Displays the current IP4 address of the R&S

 

ZNB/ZNBT. By default, the analyzer is

configured to use dynamic TCP/IP configuration (DHCP) and obtain all IP address
information automatically. See 

Chapter 4.1.12.1, "Assigning an IP Address"

,

on page 29.

The button opens the Windows "Network Connections" system config dialog that
allows you to configure the IP4 (and IP6) settings of your instrument.

GPIB Address

Defines the analyzer's GPIB address. The address must be in the range between 0
and 30.

Remote command: 

SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
SYSTem:COMMunicate:GPIB[:SELF]:DCLear:SUPPress

Remote Language

Selects the syntax of the R&S

 

ZNB/ZNBT's instrument control commands.

●

The DEFAULT language corresponds to the commands reported in this documen-
tation; see 

Chapter 8.3, "SCPI Command Reference"

, 

on page 751.

●

The ZVABT language ensures compatibility with network analyzers of the R&S
ZVA/B/T family. E.g., compared to the DEFAULT language, the command set does
not include 

INITiate:CONTinuous:ALL

 and 

INITiate[:IMMediate]:ALL

.

The function of 

INITiate:CONTinuous

 and

INITiate[:IMMediate][:DUMMy]

 is modified; refer to the remote control docu-

mentation in 

Chapter 8.3.8, "INITiate Commands"

, 

on page 1015.

●

The ZVR language ensures compatibility with network analyzers of the R&S ZVR
family. See also 

Chapter 8.4, "R&S ZVR/ZVABT Compatible Commands"

,

on page 1308.

●

PNA, ENA, HP8510, HP8720, HP8753 ... denote command sets for network ana-
lyzers from other instruments or manufacturers.

Note: 

Remote languages other than DEFAULT are intended for remote control of the

analyzer. A mixed approach, with part of the instrument configuration defined via the
GUI, is possible but can cause unexpected results in some instances.

Setup Softtool

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands