manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 1102

Command Reference

R&S

®

 ZNB/ZNBT

1102

User Manual 1173.9163.02 ─ 53

–

 A VNA cal kit file name without path but prefixed with "SD:"

refers to a specific cal kit file stored on the SD card inserted at
the active calibration unit.

–

 A VNA cal kit file name 

*.calkit

 with path refers to a spe-

cific cal kit file stored in an arbitrary directory on the analyzer.

<TestPort>

<TestPort>

Test port numbers. For an n-port automatic calibration, n arbi-
trary (not necessarily consecutive) port numbers must be speci-
fied. The analyzer automatically detects the calibration unit ports
connected to each analyzer port.

Example: 

CORR:COLL:AUTO '', 1, 2, 4

Perform an automatic 3-port  calibration at test ports 1, 2, and 4
using the calibration unit's default calibration kit file and arbitrary
test ports of the cal unit.

Usage: 

Setting only

Manual operation: 

See 

"Apply/Cancel"

 

on page 427

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure 

<CalType>,

<Characterization>

Selects a calibration type and a cal unit characterization (cal kit file) for an automatic
calibration.

Suffix: 

<Ch>

.

Channel number of the calibrated channel

Parameters:

<CalType>

FNPort | TOSM | FOPort | OPTPort | FRTRans | FTRans |
RTRans | REFL | RSHort | PFNPort
Calibration Type

FNPort

Full n-port (UOSM) calibration

TOSM

Full n-port calibration with characterized Through.
If the selected cal unit characterization does not contain a
Through characterization, the command silently falls back to a
FNPort (UOSM) calibration.

FOPort

Full one-port ("Refl OSM") calibration

OPTPort

"One Path Two Ports" calibration
If the selected cal unit characterization does not contain a
Through characterization, the command will fail.

SCPI Command Reference

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands