manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 32

Getting Started

R&S

®

 ZNB/ZNBT

32

User Manual 1173.9163.02 ─ 53

4.1.12.3

 

Remote Desktop Connection

Remote Desktop is a Windows

®

 application which you can use to access and control

the analyzer from a remote computer through a LAN connection. While the measure-
ment is running, the analyzer screen contents are displayed on the remote computer,
and Remote Desktop provides access to all of the applications, files, and network
resources of the analyzer.

At the R&S

 

ZNB/ZNBT by default remote connections are enabled using a local group

policy and remote access is granted to users instrument and administrator.

For detailed information about Remote Desktop and the connection refer to the Win-
dows

®

 Help ("Windows Start Menu > Help and Support").

To establish a remote desktop connection, proceed as follows:

1. Connect remote Windows PC and VNA to the LAN and make sure that an IP con-

nection can be established.

2. At the remote Windows PC, open a remote desktop connection (type "Remote

Desktop Connection" at the Windows Start/Search menu and hit enter).

3. In the "Remote Desktop Connection" dialog, enter the VNA's computer name or IP

address and select "Connect"

If no external monitor is connected at the time you log in to the instrument via remote
desktop, Windows

®

 possibly displays the following error message:

This message can be safely ignored.

4.1.12.4

 

Windows

®

 Firewall Settings

A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. In the default configuration of the R&S

 

ZNB/ZNBT, the firewall

is enabled. A remote desktop connection does not require any changes in the firewall
settings.

Administrator account

You need administrator rights to change the firewall settings. See note on 

"User

accounts and password protection"

 

on page 1379 above for details.

Putting the Analyzer into Operation

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands