manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 1061

Command Reference

R&S

®

 ZNB/ZNBT

1061

User Manual 1173.9163.02 ─ 53

MMEMory:STORe:TRACe:OPTion:SSEParator 

<Boolean>

This command defines whitespace insertion during Touchstone file export.

If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.

Parameters:

<Boolean>

Manual operation: 

See 

"Skip Separator Lines"

 

on page 681

MMEMory:STORe:TRACe:OPTion:SYMMetric 

<Boolean>

This command activates/deactivates the export of symmetric (balanced) S-parameters
for 

MMEMory:STORe:TRACe:PORTs

.

Parameters:

<Boolean>

Manual operation: 

See 

"Symmetric Params"

 

on page 340

MMEMory:STORe:TRACe:OPTion:TABS 

<Boolean>

This command defines whitespace insertion during Touchstone file export.

If set to ON, columns are separated by tabs rather than spaces.

Parameters:

<Boolean>

Manual operation: 

See 

"Use TAB (instead of blanks)"

 

on page 681

MMEMory:STORe:TRACe:OPTion:TRIM 

<Boolean>

This command defines whitespace insertion during Touchstone file export.

If set to ON, whitespace at the beginning of each line is removed.

Parameters:

<Boolean>

Manual operation: 

See 

"Trim Leading Whitespace"

 

on page 681

MMEMory:STORe:TRACe:PORTs 

<Channel>, <TouchstoneFile>, <Format>[,

<ModeImpedance>, <Port>, <Port>...]

Generates an s

n

p Touchstone file, where 

n

 is the number of specified ports.

If 

MMEMory:STORe:TRACe:OPTion:SYMMetric

 is OFF, the Touchstone file contains

the full set of single-ended S-parameters. Otherwise it contains the full set of mixed
mode S-parameters. Both sets have a size of 

n

2

.

SCPI Command Reference

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands