Rohde & Schwarz 1311.6010.22, User Manual

Page: 303 / 1451

GUI Reference
R&S
®
ZNB/ZNBT
303 User Manual 1173.9163.02 ─ 53
Remote command:
CALCulate<Chn>:MATH:MEMorize
TRACe:COPY
Data & Func to <Destination>
Stores the current state of the active data trace – including trace functions – to the
Destination memory trace.
Trace functions
The trace functions comprise the following mathematical operations:
●
Active trace math on unformatted and formatted traces, as configured in the Chap-
ter 6.5.4, "Math Tab" , on page 305.
●
A shift of the data trace (see "Shift Trace" on page 335).
Data to <Destination> stores the raw trace without the trace functions, "Data & Func to
<Destination>" stores the trace after it has been transformed using the trace functions.
For the relation between a data trace and its associated memory traces, see "Coupling
of data and memory traces" on page 302.
Remote command:
CALCulate<Chn>:MATH:MEMorize
Destination
Selects the destination for the Data to <Destination> and Data & Func to <Destination>
operations.
The destination can be one of the following:
●
An existing memory trace of the active data trace.
The existing memory trace is overwritten.
●
"New Trace"
The data are copied to a new memory trace, associated to the current data trace.
Remote command:
n/a
Show <Active Data Trace>
Shows or hides the active data trace in the diagram.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
6.5.3 All Mem All Data Tab
Performs actions on all data or memory traces in the active recall set.
Trace Config Softtool