Rohde & Schwarz 1311.6010.22, User Manual

Page: 1283 / 1451

Command Reference
R&S
®
ZNB/ZNBT
1283 User Manual 1173.9163.02 ─ 53
SYSTem:CORRection:WIZard[:IMMediate] <Dialogs>
Keysight-compatible command to open the Start Cal Tab or the Calibration Kits Dialog .
Tip: When working with the Chapter 7.1.3, "GPIB Explorer" , on page 715, switch to
raw mode ("Options">"Raw mode" in the IECWIN32 GUI) before executing this com-
mand.
Setting parameters:
<Dialogs> MAIN | CKIT
MAIN: open the "Calibration > Start Cal" softtool tab
CKIT: open the "Calibration Kits" dialog
Usage: Setting only
SYSTem:DATE <Year>, <Month>, <Day>
The command queries or defines the instrument's current date setting.
The setting command requires administrator rights; refer to Chapter 11.1.1, "Windows
Operating System" , on page 1379.
Parameters:
<Year> Year, four-digit number
<Month> Month, two-digit number, 01 (for January) to 12 (for December)
<Day> Day, two-digit number, 01 to the number of days in the month
Example: SYST:DATE?
Response:
2012,05,01
- it is the 1st of May, 2012.
SYSTem:DFPRint?
Queries the device footprint. The device footprint contains detailed information about
the instrument and is mostly used for service purposes.
Usage: Query only
Manual operation: See "Save... / Print... / Save Report" on page 684
SYSTem:DISPlay:BAR:HKEY[:STATe] <Boolean>
SYSTem:DISPlay:BAR:MENU[:STATe] <Boolean>
SYSTem:DISPlay:BAR:STATus[:STATe] <Boolean>
SYSTem:DISPlay:BAR:STOols[:STATe] <Boolean>
SYSTem:DISPlay:BAR:TITLe[:STATe] <Boolean>
SYSTem:DISPlay:BAR:TOOLs[:STATe] <Boolean>
Displays or hides the hardkey panel (
HKEY
), the menu bar below the diagram area
(
MENU
), the status bar below the diagram area (
STATus
), the softtool panel (
STOols
),
the title bar of the main VNA application window (
TITLe
), and the toolbar above the
diagram area (
TOOLs
).
SCPI Command Reference