manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 46

Getting Started

R&S

®

 ZNB/ZNBT

46

User Manual 1173.9163.02 ─ 53

Input levels, EMC

The maximum input levels and voltages of the input connectors at the front and rear
panel must not be exceeded. Match signals with 50 Ω to comply with EMC directives.
See also 

Chapter 4.1.5, "EMI Suppression"

, 

on page 22.

4.3

 

Operating the Instrument

The following sections describe the basics of manual operation, i.e. how to access
instrument functions and settings via the analyzer GUI. Manual operation is particularly
useful for getting to know the instrument and for trouble shooting.

Manual and remote control of the instrument

In contrast to the R&S

 

ZNB, the R&S

 

ZNBT is primarily intended to be remote-control-

led via the GPIB or LAN interface (see chapter 'Remote Control' in the user manual).
However, all instruments can be controlled manually, either using touchscreen and
frontpanel keys (R&S

 

ZNB only), an external monitor in combination with a mouse (see

also 

Chapter 4.1.9, "Connecting External Accessories"

, 

on page 24) or via Remote

Desktop (see also 

Chapter 4.1.12, "Remote Operation in a LAN"

, 

on page 28).

Manual operation and remote control are described to their full extent in the 

GUI Refer-

ence

 and 

Command Reference

 chapters, respectively. GUI functions and their related

remote commands are linked bidirectionally. Background information is provided in the

Concepts and Features

 chapter.

4.3.1

 

Manual Operation

The analyzer functions are accessible via several tabbed softtools, each presenting
related functions and settings. The function keys on the front panel (R&S

 

ZNB only) or

the on-screen "Hard Key Panel" open the most frequently used softtools.

Manual operation via function keys and softtools provides touch-friendly access to the
instrument functions and settings, avoiding complicated menu structures and long
operating sequences. In general, this approach is recommended. However, sometimes
the toolbar or an object's context menu can offer a shortcut. As a full-fledged alterna-
tive for manual operation via mouse and keyboard, also the menu bar provides access
to all instrument functions and settings.

Operating the Instrument

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands