Annexes
R&S
®
ZNB/ZNBT
1403
User Manual 1173.9163.02 ─ 53
ENA Emulation Command
R&S
ZNB/ZNBT Default Parser Command
MMEMory:LOAD:LIMit <string>
MMEMory:LOAD:SEGMent <string>
MMEMory:LOAD:[:STATe] <string>
MMEMory:MDIRectory <string>
MMEMory:STORe[:STATe] <string>
MMEMory:STORe:FDATa <string>
MMEMory:STORe:LIMit <string>
MMEMory:STORe:SEGMent <string>
MMEMory:STORe:SNP:DATA <filename>
MMEMory:STORe:SNP:TYPE:S1P <numeric>
MMEMory:STORe:SNP:TYPE:S2P <numeric1>,
<numeric2>
MMEMory:STORe:SNP:TYPE:S3P <numeric1>,
<numeric2>, <numeric3>
MMEMory:STORe:SNP:TYPE:S4P <numeric3>,
<numeric2>, <numeric3>, <numeric4>
MMEMory:STORe:STYPe {STATe|CSTate|DSTate|
CDSTate}
Always saves measurement conditions and calibra-
tion state (CSTate), regardless of what you set it to.
SENSe{1...4}:AVERage:CLEar
SENSe{1...4}:AVERage:COUNt <numeric>
SENSe{1...4}:AVERage[:STATe] {ON|OFF|1|0}
SENSe{1...4}:BWIDth[:RESolution] <bandwidth>
[SENSe<Ch>:]BWIDth[:RESolution]
SENSe{1...4}:BWIDth[:RESolution]:SELect NORMal
| HIGH
[SENSe<Ch>:]BWIDth[:RESolution]:SELect
SENSe{1...4}:CORRection:COL-
Lect[:ACQuire]:LOAD <numeric>
SENSe{1...4}:CORRection:COL-
Lect[:ACQuire]:OPEN <numeric>
SENSe{1...4}:CORRection:COL-
Lect[:ACQuire]:SHORt <numeric>
SENSe{1...4}:CORRection:COLLect[:ACQuire]:ISO-
Lation <numeric1>, <numeric2>
SENSe{1...4}:CORRection:COL-
Lect[:ACQuire]:THRU <numeric1>, <numeric2>
[SENSe<Ch>:]CORRection:COLLect[:
ACQuire]:SELected
SENSe{1..4}:CORRection:COLLect:CKIT[:SELect]
<integer>
[SENSe:]CORRection:CKIT:SELect
SENSe{1...4}:CORRection:COLLect:ECAL:ISOLa-
tion[:STATe] {OFF|0}
None (no action)
ENA Emulation Commands
