manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 1060

Command Reference

R&S

®

 ZNB/ZNBT

1060

User Manual 1173.9163.02 ─ 53

<DecSeparator>

POINt | COMMa
POINt - Decimal separator: point.
COMMa - Decimal separator: comma.
If the third optional parameter is omitted, points are used.

<FieldSeparator>

SEMicolon | COMMa | TABulator | SPACe
SEMicolon - Field separator: semicolon
COMMa - field separator: comma.
TABulator - field separator: tabulator.
SPACe - field separator: space.
If the third optional parameter is omitted, semicolons are used.

Example: 

*RST; :CONF:TRAC:NAME?

Reset the instrument, creating a default channel no 1  and a
default trace Trc1.

CALC:PAR:DEF:SGR 1,2

Create four traces to measure the two-port S-parameters S

11

,

S

12

, S

21

, S

22

. The traces are not displayed.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.csv'

Store all trace data of channel 1 to a trace file.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.s2p'

Store the four S-parameter traces to a two-port Touchstone file.
The Touchstone file will not contain the default trace Trc1.

Usage: 

Setting only

Manual operation: 

See 

"Save"

 

on page 341

MMEMory:STORe:TRACe:OPTion:COMMent 

<Comment>

Defines a comment to be added to (the comment section of) exported trace files.

This is a global setting, i.e. the comment string is used for each trace export in every
open recall set.

Parameters:

<Comment>

Comment string. If empty, no comment will be added.

Manual operation: 

See 

"Comment Added to File"

 

on page 341

MMEMory:STORe:TRACe:OPTion:PLUS 

<arg0>

This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.

Parameters:

<arg0>

SPACe | PLUS | VOID

Manual operation: 

See 

"Positive Number Prefix"

 

on page 681

SCPI Command Reference

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands