manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 664

GUI Reference

R&S

®

 ZNB/ZNBT

664

User Manual 1173.9163.02 ─ 53

The info table is a possible container for info fields and can be placed to the bottom, to
the left, or to the right of the screen. See also 

Chapter 6.7.8, "Info Field Tab"

,

on page 382.

Remote command: 
No command; display configuration only.

Info Window

Shows/hides the 

Info Window

Remote command: 

DISPlay:IWINdow[:STATe]

Font Size

Scales the fonts in the diagrams. The scaling affects the trace and channel lists, and
the info fields.

Remote command: 

DISPlay:RFSize

6.16.3.2

 

Define User Color Scheme Dialog

The "Define User Color Scheme" dialog modifies the predefined color schemes,
changing the colors and styles of the individual display elements. User-defined color
schemes can be saved to a file for later re-use.

Access:

 SYSTEM – [DISPLAY] > "Config" > "Define User Color..."

Related settings

Refer to 

"Color Scheme"

 

on page 662.

Display Softtool

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands