manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 305

GUI Reference

R&S

®

 ZNB/ZNBT

305

User Manual 1173.9163.02 ─ 53

For each data trace, the current trace data are copied to a new memory trace,
associated to this data trace.

New memory traces are named "Mem<n>[<Data_Trace>]" with <n> selected by the
analyzer firmware to make trace names unique.

Remote command: 
n/a

Show All Data / Hide All Data / Show All Mem / Hide All Mem

Displays or hides all data or memory traces in the active recall set. Hidden traces are
not deleted.

Remote command: 

DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW

Delete All Mem

Deletes all memory traces in the active recall set.

Tips:

●

Use the 

Trace Manager Dialog

 to hide or delete arbitrary sets of traces.

●

Use the UNDO function of the analyzer to restore a trace that was unintentionally
deleted.

Remote command: 

CALCulate:PARameter:DELete:MEMory

6.5.4

 

Math Tab

Allows you to define mathematical operations on traces.

Background information

Refer to 

"Trace Types"

 

on page 93.

Trace Config Softtool

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands