manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 145

Concepts and Features

R&S

®

 ZNB/ZNBT

145

User Manual 1173.9163.02 ─ 53

Example: Renormalization comments

!The following Port Impedance Renormalization has been used when saving the data.
!PortZ  Port1:50+j0    Port2:70+j0
!Note: The Port Impedances differ from the reference impedance of this file.
!      While reading the file the reference impedance value of the option line above
!      is always used.

Touchstone files cannot be used to export mathematical traces.

5.4.2.2

 

ASCII (*.csv) Files

An ASCII file contains a header and the actual trace data:

freq;reTrc1_S21;imTrc1_S21;reMem2[Trc1]_S21;imMem2[Trc1]_S21;

300000.000000;0.000000;0.000000;0.000000;0.000000;

40499497.487437;0.000000;0.000000;0.000000;0.000000;

80698994.974874;0.494927;-0.065174;0.500833;-0.074866;

120898492.462312;0.497959;-0.111724;0.488029;-0.107375;

...

The header consists of the following data elements:

●

<Stimulus> stimulus variable: freq for Frequency sweep, power for Power sweep,
time for Time sweep, trigger for CW Mode sweep.

●

<reTrace1> first response value of first trace: re<Trace_Name>,
mag<Trace_Name> or db<Trace_Name> for output format Re/Im, lin. Mag-Phase
or dB Mag-Phase, respectively. The data format for export files can be selected in
the Export Data dialog.

●

<imTrace1> second response value of first trace: im<Trace_Name> for output for-
mat Re/Im, ang<Trace_Name> for output formats lin. Mag-Phase or dB Mag-
Phase. The data format for export files can be selected in the Export Data dialog.

●

<reTrace2> first response value of second trace: re<Trace_Name>,
mag<Trace_Name> or db<Trace_Name> for output format Re/Im, lin. Mag-Phase
or dB Mag-Phase, respectively. The data format for export files can be selected in
the Export Data dialog.

●

<imTrace2>... second response value of second trace: im<Trace_Name> for output
format Re/Im, ang<Trace_Name> for output formats lin. Mag-Phase or dB Mag-
Phase. The data format for export files can be selected in the Export Data dialog.
first response value of second trace. HZ / KHZ / MHZ / GHZ allowed for imported
files. The analyzer always uses HZ for exported data. second response value of
first trace: im<Trace_Name> for output format Re/Im, ang<Trace_Name> for output
formats lin. Mag-Phase or dB Mag-Phase. The data format for export files can be
selected in the Export Data dialog.

The trace data is arranged as described in the header. Different values are separated
by semicolons, commas or other characters, depending on the selected "Decimal Sep-

Operations on Traces

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands