manualshive.com logo in svg

Rohde & Schwarz 1311.6010.22, User Manual

Share
Download
Rohde & Schwarz 1311.6010.22 User Manual Download Page 1279

Command Reference

R&S

®

 ZNB/ZNBT

1279

User Manual 1173.9163.02 ─ 53

SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:RELays:SWITch:COUNt?

For mechanical matrices, this command allows to query the list of switch counts for all
relays (if supported by the matrix).

Suffix: 

<Matr>

.

Index of the switch matrix (see 

SYSTem:COMMunicate:

RDEVice:SMATrix<Matr>:DEFine

 

on page 1275)

Usage: 

Query only

Manual operation: 

See 

"Configured External Switch Matrices"

 

on page 685

SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:SERial?

Returns the serial number of the related switch matrix.

Suffix: 

<Matr>

.

Index of the switch matrix (see 

SYSTem:COMMunicate:

RDEVice:SMATrix<Matr>:DEFine

 

on page 1275)

If the switch matrix is not part of the RF configuration, the query
returns an "Invalid suffix" error.

Usage: 

Query only

Manual operation: 

See 

"Configured Devices"

 

on page 703

8.3.17.2

 

SYSTem:DATA:MEMory...

These commands allow you to configure memory-mapped trace data transfer. See

Chapter 5.4.3, "Memory-Mapped Trace Data Transfer"

, 

on page 146.

SYSTem:DATA:MEMory:ADD 

<TraceName>, <DataFormat>, <NumberOfPoints>

Adds trace <TraceName> to a previously initialized shared memory buffer.

Traces can only be added after the 

SYSTem:DATA:MEMory:INITalize

 and before

the corresponding 

SYSTem:DATA:MEMory:COMMit

.

For background information, see 

Chapter 5.4.3, "Memory-Mapped Trace Data Trans-

fer"

, 

on page 146.

Setting parameters: 

<ShMemName>

Trace name. Identifies the trace within the active recall set.

<DataFormat>

SDATa | FDATa
The data format of the stored trace values.

SDATa

Unformatted (complex) trace data.

FDATa

Formatted (real-valued) trace data.

<NumberOfPoints>

Number of trace values to be stored.

SCPI Command Reference

Summary of Contents for 1311.6010.22












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands