manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 618

FTFA_FSEC field descriptions (continued)

Field

Description

00

Backdoor key access disabled

01

Backdoor key access disabled (preferred KEYEN state to disable backdoor key access)

10

Backdoor key access enabled

11

Backdoor key access disabled

5–4

MEEN

Mass Erase Enable

Enables and disables mass erase capability of the flash memory module. When SEC is set to unsecure,
the MEEN setting does not matter.

00

Mass erase is enabled

01

Mass erase is enabled

10

Mass erase is disabled

11

Mass erase is enabled

3–2

FSLACC

Freescale Failure Analysis Access Code

Enables or disables access to the flash memory contents during returned part failure analysis at
Freescale. When SEC is secure and FSLACC is denied, access to the program flash contents is denied
and any failure analysis performed by Freescale factory test must begin with a full erase to unsecure the
part.

When access is granted (SEC is unsecure, or SEC is secure and FSLACC is granted), Freescale factory
testing has visibility of the current flash contents. The state of the FSLACC bits is only relevant when SEC
is set to secure. When SEC is set to unsecure, the FSLACC setting does not matter.

00

Freescale factory access granted

01

Freescale factory access denied

10

Freescale factory access denied

11

Freescale factory access granted

SEC

Flash Security

Defines the security state of the MCU. In the secure state, the MCU limits access to flash memory module
resources. The limitations are defined per device and are detailed in the Chip Configuration details. If the
flash memory module is unsecured using backdoor key access, SEC is forced to 10b.

00

MCU security status is secure.

01

MCU security status is secure.

10

MCU security status is unsecure. (The standard shipping condition of the flash memory module is
unsecure.)

11

MCU security status is secure.

32.3.3.4 Flash Option Register (FTFA_FOPT)

The flash option register allows the MCU to customize its operations by examining the
state of these read-only bits, which are loaded from NVM at reset. The function of the
bits is defined in the device's Chip Configuration details.

All bits in the register are read-only .

Memory Map and Registers

KV4x Reference Manual, Rev. 2, 02/2015

618

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands