manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 617

FTFA_FCNFG field descriptions (continued)

Field

Description

0

No request or request complete

1

Request to:

1. run the Erase All Blocks command,
2. verify the erased state,
3. program the security byte in the Flash Configuration Field to the unsecure state, and
4. release MCU security by setting the FSEC[SEC] field to the unsecure state.

4

ERSSUSP

Erase Suspend

Allows the user to suspend (interrupt) the Erase Flash Sector command while it is executing.

0

No suspend requested

1

Suspend the current Erase Flash Sector command execution.

3

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

2

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

1

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

0

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

32.3.3.3 Flash Security Register (FTFA_FSEC)

This read-only register holds all bits associated with the security of the MCU and flash
memory module.

During the reset sequence, the register is loaded with the contents of the flash security
byte in the Flash Configuration Field located in program flash memory. The flash basis
for the values is signified by X in the reset value.

Address: 4002_0000h base + 2h offset = 4002_0002h

Bit

7

6

5

4

3

2

1

0

Read

KEYEN

MEEN

FSLACC

SEC

Write

Reset

x*

x*

x*

x*

x*

x*

x*

x*

* Notes:

x = Undefined at reset.

•

FTFA_FSEC field descriptions

Field

Description

7–6

KEYEN

Backdoor Key Security Enable

Enables or disables backdoor key access to the flash memory module.

Table continues on the next page...

Chapter 32 Flash Memory Module (FTFA)

KV4x Reference Manual, Rev. 2, 02/2015

Freescale Semiconductor, Inc.

Preliminary

617

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands