manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1116

CANx_ESR2 field descriptions (continued)

Field

Description

• During arbitration, if an CAN_ESR2[LPTM] is found and it is inactive.
• If CAN_ESR2[IMB] is not asserted and a frame is transmitted successfully.

This bit is cleared in all start of arbitration (see Section "Arbitration process").

NOTE: CAN_ESR2[LPTM] mechanism have the following behavior: if an MB is successfully transmitted

and CAN_ESR2[IMB]=0 (no inactive Mailbox), then CAN_ESR2[VPS] and CAN_ESR2[IMB] are
asserted and the index related to the MB just transmitted is loaded into CAN_ESR2[LPTM].

0

If ESR2[VPS] is asserted, the ESR2[LPTM] is not an inactive Mailbox.

1

If ESR2[VPS] is asserted, there is at least one inactive Mailbox. LPTM content is the number of the
first one.

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

43.4.14 CRC Register (CANx_CRCR)

This register provides information about the CRC of transmitted messages. This register
is updated at the same time the Tx Interrupt Flag is asserted.

Address: Base a 44h offset

Bit

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

R

0

MBCRC

W

Reset

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Bit

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

0

R

0

TXCRC

W

Reset

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

CANx_CRCR field descriptions

Field

Description

31–23

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

22–16

MBCRC

CRC Mailbox

This field indicates the number of the Mailbox corresponding to the value in CAN_CRCR[TXCRC] field.

15

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

TXCRC

Transmitted CRC value

This field indicates the CRC value of the last transmitted message.

Memory map/register definition

KV4x Reference Manual, Rev. 2, 02/2015

1116

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands