manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 416

x = Undefined at reset.

•

DMA_TCDn_NBYTES_MLOFFYES field descriptions

Field

Description

31

SMLOE

Source Minor Loop Offset Enable

Selects whether the minor loop offset is applied to the source address upon minor loop completion.

0

The minor loop offset is not applied to the SADDR

1

The minor loop offset is applied to the SADDR

30

DMLOE

Destination Minor Loop Offset enable

Selects whether the minor loop offset is applied to the destination address upon minor loop completion.

0

The minor loop offset is not applied to the DADDR

1

The minor loop offset is applied to the DADDR

29–10

MLOFF

If SMLOE or DMLOE is set, this field represents a sign-extended offset applied to the source or
destination address to form the next-state value after the minor loop completes.

NBYTES

Minor Byte Transfer Count

Number of bytes to be transferred in each service request of the channel.

As a channel activates, the appropriate TCD contents load into the eDMA engine, and the appropriate
reads and writes perform until the minor byte transfer count has transferred. This is an indivisible operation
and cannot be halted. It can, however, be stalled by using the bandwidth control field, or via preemption.
After the minor count is exhausted, the SADDR and DADDR values are written back into the TCD
memory, the major iteration count is decremented and restored to the TCD memory. If the major iteration
count is completed, additional processing is performed.

23.3.24 TCD Last Source Address Adjustment (DMA_TCDn_SLAST)

Address: 4000_8000h base + 100Ch (32d × i), where i=0d to 15d

Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

0

R

SLAST

W

Reset

x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x* x*

* Notes:

x = Undefined at reset.

•

DMA_TCDn_SLAST field descriptions

Field

Description

SLAST

Last Source Address Adjustment

Adjustment value added to the source address at the completion of the major iteration count. This value
can be applied to restore the source address to the initial value, or adjust the address to reference the
next data structure.

This register uses two's complement notation; the overflow bit is discarded.

Memory map/register definition

KV4x Reference Manual, Rev. 2, 02/2015

416

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands