manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1355

• Updated feature list to add "Initialization trigger"
• In table "Mode, edge, and level selection", made the following changes

• In "MSnB:MSnA" column, changed "0" to "00" and "1" to "01"
• In "ELSnB:ELSnA" column, changed "0" to "00" and "1" to "01"

A.39 PIT module changes

• No substantial content changes

A.40 ENC changes

• No substantial content changes

A.41 LPTMR changes

• No substantial content changes

A.42 FlexCAN module changes

• Converted footnotes in table in CAN_CTRL2[

RFFN

 ] description to notes above the table.

• Changed reset values for RXMGMASK, RX14MASK, RX15MASK, and RXFGMASK to Undefined.
• Added the following sentence in the Note in 

Detection and Correction of Memory Errors

 : "The RXMGMASK,

RX14MASK, RX15MASK, and RXFGMASK registers need to be initialized as well."

• In 

Rx Mailboxes Global Mask Register (CAN_RXMGMASK)

, in the register description:

• Changed "RXMGMASK is always in effect" to "RXMGMASK is always in effect (the bits in the MG field will mask

the Mailbox filter bits)".

• Changed "RXMGMASK has no effect" to "RXMGMASK has no effect (the bits in the MG field will not mask the

Mailbox filter bits).

• In 

FlexCAN module features

 :

• Added feature: "Flexible message buffers (MBs), totaling to 64 message buffers of 8 bytes data length each,

configurable as Rx or Tx"

•

Error Indication

 :

• In third step of handling sequence for error indication changed "Clear the Interrupt flag" to "Clear the HANCEIF,

FANCEIF, CEIF flags"

• In section 

Receive process

 sentence "Otherwise, when CAN_MCR[SRXDIS] bit is asserted, FlexCAN can receive

frames transmitted by itself...", corrected "asserted" to "deasserted".

• Minor editorial changes in register information.
• In 

Module Configuration Register (CAN_MCR)

, added "This bit is not affected by soft reset" to the LPMACK, FRZACK,

SOFTRST, NOTRDY, and MDIS field descriptions.

• In 

Rx Mailboxes Global Mask Register (CAN_RXMGMASK)

, revised the table in the MG field description.

Appendix A Release Notes

KV4x Reference Manual, Rev. 2, 02/2015

Freescale Semiconductor, Inc.

Preliminary

1355

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands